Edmond Storm Shelters

Edmond Storm SheltersIf you’re considering purchasing a storm shelter in EdmondOK the FlatSafe Storm Shelter may be just what you’re searching for. This patented (#7428800) advanced new product is an underground storm shelter intended for use in your home’s garage. Providing beyond F5 protection, it may be installed in an existing home and optimize the floor area beneath your vehicle.

Whether you select our HDPE storm shelter or one of our  Edmond Storm Shelters, we GUARANTEE that it will never float. Edmond FlatSafe storm Shelters are back-filled 100 percent with ready-mix concrete (NOT dirt) to counteract buoyancy and flotation of the installed shelter. Our Edmond storm shelter installation contractors will deal with the whole process of installation from beginning to end.

Each of our storm shelters Edmond OK options provides its own benefits. Not sure on which tornado shelter is right for your home and budget? Contact our dedicated Edmond storm shelter experts today at (866) 520-FLAT or keep reading to find out more about our innovative shelter designs. 

We Install And Sell Three Types Of Storm Shelters in Edmond

• High-Density Polyethylene Storm Shelters

High-Density Polyethylene (HDPE) Shelters offer rust proof, waterproof, durable, long-lasting storm shelters ─ resistant to environmental stress and mechanical damage. With a 50-year warranty, HDPE is an engineered polymer…a polyethylene thermoplastic made with a mold. High-Density Polyethylene is also commonly used for: boat lifts and personal watercraft docks, plastic bottles, jugs, food containers, storage totes, underground piping and culverts, plastic lumber and decking, cutting boards, auto parts, toys, etc.. It’s the ultimate in Corrosion Protection.

• Hot Dip Galvanized Storm Shelters

Our Hot Dip Galvanized storm shelters are made of 10 gauge sheet metal and flow tested ─ providing protection from corrosion and rust for a long-lasting, maintenance free storm shelter. With a 50 year guarantee Hot Dip Galvanizing is the process of dipping fabricated steel into a kettle or vat containing molten zinc. While the steel is in the kettle, the iron from the steel metallurgically reacts with the molten zinc to form a tightly-bonded metal coating that provides superior corrosion protection to steel. Using zinc to protect steel from corrosion (hot-dip galvanizing) is a 150-year-old practice! Our Galvanized FlatSafe storm shelter is made of 10 gauge sheet metal. All welds are leak-tested to ensure they will not allow ground water to seep into the shelter. After the shelter is fabricated, the unit is Hot-Dip Galvanized to protect your investment for an expected 50+ years.

• Coal Tar Epoxy Storm Shelters

Coal Tar Epoxy is a heavy duty, high build protective coating that has high strength, is resistant to most corrosive reagents, and is excellent at sealing out moisture. It’s widely used in marine and industrial environments. It is largely applied to steel to protect it from corrosion and rust. It is often seen on steel vessel hulls, underground water and petroleum tanks and pipelines, offshore oil rigs, and dam gates. Our Coal Tar Epoxy underground storm shelter is made of 10 gauge sheet metal. All welds are leak-tested to ensure they will not allow ground water to seep into the shelter. After the shelter is fabricated, we apply a thick coating of Coal Tar Epoxy to the outside of the shelter. The Coal Tar Epoxy bonds to the steel and serves to protect the exterior of the steel shelter from rust and corrosion. The interior of the storm shelter is painted with red oxide primer paint to protect the steel on the interior from corrosion and rust.

Flat Safe Storm Shelters

Storm Shelters Edmond
High-Density Polyethylene (HDPE)

According to a National Storm Shelter Association (NSSA) Evaluator, Dr. James McDonald, a Professional Engineer, “The FlatSafe Storm Shelter designs are well recorded and well thought out”.

Dr. McDonald also said, “The attention to detail is commendable”. In addition to the decisions of an NSSA evaluator, Larry Tanner, a Professional Engineer and Research Associate at Texas Tech University, stated; “The Wind Engineering Research Center at Texas Tech University applauds your company’s efforts in providing a safe product for the customer”.

All of our Edmond Storm Shelters Are Equipped With Our Single Piece Lid System

All of our underground storm shelters that we install and sell in Edmond include our patented single piece lid system. The lid is 1/4″ thick steel plate with added structural tubing to provide additional strength. The single-piece lid is bigger than the framework of the saferoom opening and sits over the frame, not down within the frame. Our lid system is MUCH stronger than the typical 2-piece lid system offered by everyone else and provides more than adequate ventilation to the occupants.

Contact our dedicated specialists today at (866) 520-FLAT to learn more about the installation of our storm shelters at your Edmond home.