Storm Shelters Hobart

Hobart Storm SheltersIf you’re considering the purchase of a storm shelter in Hobart, the FlatSafe Storm Shelter may be just what you’re searching for. This patented (#7428800) innovative new product is an underground storm shelter intended for use in your home’s garage. Providing beyond F5 protection, it may be installed in an existing house and optimize the floor area beneath your vehicle.

Whether you choose our HDPE storm shelter or one of our steel shelters, we GUARANTEE that it won’t ever float. FlatSafe storm Shelters are back-filled 100 percent with ready-mix concrete (NOT dirt) to counteract buoyancy and flotation of the installed shelter. Our Hobart storm shelter installation contractors will handle the entire process of installation from beginning to end.

Each of our shelter options provides its own advantages. Not sure on which tornado shelter is right for your home and budget? Contact our dedicated storm shelter experts today at (866) 520-FLAT or keep reading to learn more about our innovative shelter designs. 

We Install And Sell Three Types Of Storm Shelters in Hobart

• High-Density Polyethylene Storm Shelters

High-Density Polyethylene (HDPE) Shelters offer rust proof, waterproof, durable, long-lasting storm shelters ─ resistant to environmental stress and mechanical damage. With a 50-year guarantee, HDPE is an engineered polymer…a polyethylene thermoplastic made with a mold. High-Density Polyethylene is also commonly used for: boat lifts and personal watercraft docks, plastic bottles, jugs, food containers, storage totes, underground piping and culverts, plastic lumber and decking, cutting boards, auto parts, toys, etc.. It is the ultimate in Corrosion Protection.

• Hot Dip Galvanized Storm Shelters

Our Hot Dip Galvanized storm shelters are made of 10 gauge sheet metal and flow tested ─ providing protection against corrosion and rust for a long-lasting, maintenance free storm shelter. With a 50 year guarantee Hot Dip Galvanizing is the process of dipping fabricated steel into a kettle or vat containing molten zinc. While the steel is in the pot, the iron in the steel metallurgically reacts with the molten zinc to form a tightly-bonded metal coating that provides superior corrosion protection to steel. Using zinc to protect steel from corrosion (hot-dip galvanizing) is a 150-year-old practice! Our Galvanized FlatSafe storm shelter is made of 10 gauge sheet metal. All welds are leak-tested to ensure they will not allow ground water to seep into the shelter. After the protector is fabricated, the unit is Hot-Dip Galvanized to protect your investment for an expected 50+ years.

• Coal Tar Epoxy Storm Shelters

Coal Tar Epoxy is a heavy duty, high build protective coating which has high durability, is resistant to many corrosive reagents, and is excellent at sealing out moisture. It is widely used in marine and industrial environments. It is largely applied to steel to protect it from corrosion and rust. It is often seen on steel boat hulls, underground water and oil tanks and pipelines, offshore oil rigs, and dam gates. Our Coal Tar Epoxy underground storm shelter is made of 10 gauge sheet metal. All welds are leak-tested to ensure they won’t allow ground water to seep into the shelter. After the shelter is fabricated, we apply a thick coating of Coal Tar Epoxy into the exterior of the shelter. The Coal Tar Epoxy bonds to the steel and serves to protect the outside of the steel shelter from rust and corrosion. The inside of the storm shelter is painted with red oxide primer paint to protect the steel on the interior from rust and corrosion.

Flat Safe Storm Shelters

Storm Shelters Hobart
High-Density Polyethylene (HDPE)

According to a National Storm Shelter Association (NSSA) Evaluator, Dr. James McDonald, a Professional Engineer, “The FlatSafe Storm Shelter designs are well recorded and well thought out”.

Dr. McDonald also mentioned, “The attention to detail is commendable”. Along with the decisions of an NSSA evaluator, Larry Tanner, a Professional Engineer and Research Associate at Texas Tech University, said; “The Wind Engineering Research Center at Texas Tech University applauds your company’s efforts in providing a safe product for the consumer”.

All of our Storm Shelters Are Equipped With Our Single Piece Lid System

All of our underground storm shelters that we install and sell in Hobart include our patented single piece lid system. The lid is 1/4″ thick steel plate with additional structural tubing to provide additional strength. The single-piece lid is larger than the frame of the saferoom opening and sits above the frame, not down inside the frame. Our lid system is a lot stronger than the normal 2-piece lid system offered by everyone else and provides more than adequate ventilation to the occupants.

Contact our dedicated specialists today at (866) 520-FLAT to learn more about the installation of our storm shelters in your Hobart home.