Storm Shelters Lawton
If you’re considering purchasing a storm shelter in Lawton, the FlatSafe Storm Shelter might be just what you’re looking for. This patented (#7428800) advanced new product is an underground storm shelter meant for usage in your home’s garage. Supplying beyond F5 protection, it may be installed in an existing house and optimize the floor space under your vehicle.
Whether you select our HDPE storm shelter or one of our steel shelters, we GUARANTEE that it will never float. FlatSafe storm Shelters are back-filled 100 percent with ready-mix concrete (NOT dirt) to counteract buoyancy and flotation of the installed shelter. Our Lawton storm shelter installation contractors will handle the whole process of installation from beginning to end.
Each of our shelter options provides its own benefits. Not sure on which tornado shelter is suitable for your home and budget? Contact our dedicated storm shelter experts today at (866) 520-FLAT or keep reading to find out more about our innovative shelter designs.
We Sell And Install Three Varieties of Storm Shelters in Lawton
• High-Density Polyethylene Storm Shelters
High-Density Polyethylene (HDPE) Shelters provide rust proof, waterproof, durable, long-lasting storm shelters ─ resistant to environmental stress and mechanical damage. With a 50-year warranty, HDPE is an engineered polymer…a polyethylene thermoplastic made with a mold. High-Density Polyethylene is also commonly used for: boat lifts and personal watercraft docks, plastic bottles, jugs, food containers, storage totes, underground piping and culverts, plastic lumber and decking, cutting boards, auto parts, toys, etc.. It’s the ultimate in Corrosion Protection.
• Hot Dip Galvanized Storm Shelters
Our Hot Dip Galvanized storm shelters are made of 10 gauge sheet metal and leak tested ─ providing protection against corrosion and rust for a long-lasting, maintenance free storm shelter. With a 50 year warranty Hot Dip Galvanizing is the process of dipping fabricated steel into a kettle or vat containing molten zinc. While the steel is in the pot, the iron in the steel metallurgically reacts with the molten zinc to form a tightly-bonded alloy coating that offers superior corrosion protection to steel. Using zinc to protect steel from corrosion (hot-dip galvanizing) is a 150-year-old practice! Our Galvanized FlatSafe storm shelter is made of 10 gauge sheet metal. All welds are leak-tested to ensure they will not allow ground water to seep into the shelter. Following the shelter is fabricated, the device is Hot-Dip Galvanized to protect your investment for an expected 50+ years.
• Coal Tar Epoxy Storm Shelters
Coal Tar Epoxy is a heavy duty, high build protective coating that has high strength, is resistant to most corrosive reagents, and is excellent at sealing out moisture. It is widely used in marine and industrial environments. It’s primarily applied to steel to protect it from rust and corrosion. It is frequently seen on steel boat hulls, underground water and oil tanks and pipelines, offshore oil rigs, and dam gates. Our Coal Tar Epoxy underground storm shelter is made of 10 gauge sheet metal. All welds are leak-tested to guarantee they will not allow ground water to seep into the shelter. Following the shelter is fabricated, we apply a thick coating of Coal Tar Epoxy into the outside of the shelter. The Coal Tar Epoxy bonds to the steel and serves to protect the outside of the steel shelter from rust and corrosion. The inside of the storm shelter is painted with red oxide primer paint to protect the steel on the interior from corrosion and rust.
Flat Safe Storm Shelters
According to a National Storm Shelter Association (NSSA) Evaluator, Dr. James McDonald, a Professional Engineer, “The FlatSafe Storm Shelter layouts are well recorded and well thought out”.
Dr. McDonald also mentioned, “The attention to detail is commendable”. Along with the conclusions of an NSSA evaluator, Larry Tanner, a Professional Engineer and Research Associate at Texas Tech University, said; “The Wind Engineering Research Center at Texas Tech University applauds your company’s efforts in providing a safe product for the consumer”.
All of our Lawton Storm Shelters Are Equipped With Our Single Piece Lid System
All of our underground storm shelters that we sell and install in Lawton include our patented single piece lid system. The lid is 1/4″ thick steel plate with additional structural tubing to provide additional strength. The single-piece lid is larger than the framework of the saferoom opening and sits above the framework, not down within the frame. Our lid system is MUCH stronger than the typical 2-piece lid system provided by everybody else and provides more than adequate ventilation to the occupants.
Contact our dedicated experts today at (866) 520-FLAT to find out more about the installation of our storm shelters at your Lawton home.