FlatSafe In-Garage Storm Shelter Setup in Piedmont
FlatSafe storm shelters were designed to be set up in-garage and underground. With our patented lid system, these storm shelters sit flush to the floor and are typically installed under the parking area of a motor vehicle.
With our dedicated team of storm shelter installation specialists in Piedmont we have perfected the art of the installation. Our unique installation process guarantees we will be in and out as fast as possible.
Storm Shelter Installation
It is recommended that the FlatSafe Storm Shelter is installed near the driveway, right in the garage door about a foot in the door. This will make it easier for Piedmont emergency response crews to get the shelter should you become trapped from construction collapse or fallen debris. Possessing the storm shelter installed near the exterior of the home will also restrict the amount of debris which emergency response crews will need to remove to access the lid of the storm shelter.
Storm Shelter Placement
The choice to install the shelter to the left or right side of the garage is at the discretion of the homeowner. There may be a preference depending on the size of the garage, the number of vehicles parked in it, and accessibility to the shelter from the interior of the house.
Our installation contractors will arrive and discuss the positioning of the storm shelter with you and identify the precise positioning of it before proceeding with installation.
Cutting The Concrete Slab
Next, we use a wet saw to cut the concrete slab. The wet saw provides precision cuts and minimizes dust. As we’re cutting the concrete slab we squeegee the garage to eliminate as much water and concrete mud as possible from the garage.
Following the concrete slab is cut and removed, it is time to bring in the bucket. The bucket is used to remove the dirt from the installation area so that there is an opening to decrease the shelter into. Part of this FlatSafe installation process includes removing the dirt and hauling it away to a Piedmont disposal site so that the homeowner is not responsible for Disposing of the ground.
Installing The Storm Shelter
After the dirt is removed, the shelter is lowered into the hole and set with concrete. We install 3 different styles of in-garage underground storm shelters in Piedmont.
Our storm shelters are available for use immediately following the installation. Our storm shelter installation contractors will review all of the shelter features with the homeowner including lid opening/closing, winch operation, and general safety tips. Our team will be available to answer any queries you (the homeowner) might have regarding the use and upkeep of the shelter while we are long and there after installation occurs.
According to a National Storm Shelter Association (NSSA) Evaluator, Dr. James McDonald, a Professional Engineer, “The FlatSafe Storm Shelter designs are well documented and well thought out”. Dr. McDonald also said, “The attention to detail is commendable”. In addition to the decisions of a NSSA evaluator, Larry Tanner, a Professional Engineer and Research Associate at Texas Tech University, said; “The Wind Engineering Research Center at Texas Tech University applauds your company’s efforts in providing a safe product for the consumer”.
All of our Piedmont Storm Shelters Are Equipped With Our Single Piece Lid System.
All of our underground FlatSafe Storm Shelters that we sell and install in Piedmont come with our patented single piece lid system. The lid is 1/4″ thick steel plate with additional structural tubing to give additional strength. The single-piece lid is larger than the framework of the saferoom opening and sits above the frame, not down inside the frame. Our lid system is MUCH stronger than the typical 2-piece lid system offered by everybody else and provides more than adequate ventilation to the occupants. We also specialize in tornado shelter installation.
Contact our dedicated experts today at (866)520-FLAT to learn more about the installation of our storm shelters at your Piedmont home.